Sherpa Connection System

Leading technology in standardized wood connector systems

ADLER LIGNOVIT-Professional Wood Finishes with Added Value

Sherpa Connector systems are concealed timber connection solutions designed to provide strong, precise and efficient structural connections for modern timber construction applications. Suitable for residential and commercial projects, the range supports rapid installation, high load performance and clean architectural finishes.

BENEFITS

Safety through an approved system
Multifunctional in strength and use
Standardised and simple evaluation
A high degree of pre-fabrication
Quick assembly

Available at Siegware

A Standardized connections for Timber, CLT and Glulam constructions are available now.

Sherpa Partner Portal

Sherpa Calculator Tools

Sherpa Timber Series Connectors

For connections in timber engineering such as roof, wall and beam constructions.

Sherpa timber connectors come in 6 standard widthts:

XS = 30mm width
S = 40mm width
M = 60mm width
L = 80mm width
XL = 120mm width
XXL = 140mm width

Sherpa CLT Connector

The Sherpa CLT connector is a all rounder connector for CLT applications.

Connection applications include:

Angle joints
T-joints
Longitudinal joints
Wall to ceiling connection
Ceiling joints

Optimised for 3 and 5 layer cross laminated timber elements.

The Sherpa CLT Connector is milled flush into the CLT or Glulam for an unobtrusive finish.

Sherpa Assembly Series Connectors

Practical connectors for the production of non load rated applications such as sunrooms, carports, stairs and furniture. Perfect for professional and DIY projects.

Sherpa Sonus Connector

A truly decoupled sound attentuating connector with no fasteners passing through the vibration bearing.

Available in 2 sizes:

Sonus M – 115 x 75 x 140mm
Sonus L – 235 x 75 x 140mm

Sherpa EFCON Facade Connector

For the connection of timber elements to load bearing subbases such as exterior wall of new or existing buildings.

Enables mounting and fixing of prefabricated facade elements in timber construction for building high-grade and energy efficient buildings.

The Sherpa EFCON facade connector consists of two component. The smaller part connects to the facade element in a friction type and precise manner. Horizontal and vertical wind forces, dead load, earthquake loads can be diverted to the substrate.

Sherpa Regufoam Soundproof Bearings

Regufoam soundproof bearings are waterproof, rot-proof and made from mixed cellular polyeurethane foam.

Available in 12 different strength levels distinguished by colour.
Standard thickness of 12.5 and 25mm
Wide range of frequency attenuation up to 8 Hertz.
Area of static application from 0.011 to 2.50 M/mm², dynamic application area up to 3.5N/mm²
Proven long-term behavior and excellent durability.